Compatible with Mercedes & Freightliner Sprinters 2019-2023 (907) with rear only camera & MBUX radio.*
*Note:some MBUX radios do not have a NAVI/MAP button and the NAVI/MAP button is used to activate the camera on-demand. We are working on firmware that supports these radios and hope to release it soon. If the vehicle does not have a NAVI/MAP button on the MBUX radio, please let us know and we will let you know when the new firmware is available. If the vehicle does have the NAVI/MAP button on the MBUX radio and a rear only camera, the system will work with the current firmware.
For Sprinters with 360 degree camera and MBUX radio, see 907OBD360
Sprinter 360 Degree Camera On-Demand Programmer: Allows OEM 360 Camera Button to Work at Speeds Above 10MPH
Two programming options available. Allows OEM 360 degree camera to be turned on at speeds above 10 MPH OR use 360 camera without any 10 MPH auto cutoff for full control
- Plug & play OBD programmer- installs in minutes
- The OEM 360 camera button only activates the 360 degree camera at speeds below 10 MPH. Remove that limitation with this programmer.
- For vehicles equipped with backup camera only will allow for backup camera on-demand if it is equipped with the factory parking sensors. If the vehicle only has a rear camera with NO parking sensors, the 907OBD360 programmer will not work at this time. We are working on a rear camera only version for a future release.
Compatible vehicles:
Note: only compatible with MBUX equipped Sprinters with OEM 360 camera or backup camera only MBUX Sprinters with factory parking sensors.
Click here for demo video
Click here for installation / programming instructions
** This is a single vehicle use programmer. The programmer will not work on multiple vehicles- but the same vehicle can be programmed multiple times, if needed.
Sprinter 360 Degree Camera On-Demand Programmer: Allows OEM 360 Camera Button to Work at Speeds Above 10MPH
Two programming options available. Allows OEM 360 degree camera to be turned on at speeds above 10 MPH OR use 360 camera without any 10 MPH auto cutoff for full control
- Plug & play OBD programmer- installs in minutes
- The OEM 360 camera button only activates the 360 degree camera at speeds below 10 MPH. Remove that limitation with this programmer.
- For vehicles equipped with backup camera only will allow for backup camera on-demand if it is equipped with the factory parking sensors. If the vehicle only has a rear camera with NO parking sensors, the 907OBD360 programmer will not work at this time. We are working on a rear camera only version for a future release.
Compatible vehicles:
Note: only compatible with MBUX equipped Sprinters with OEM 360 camera or backup camera only MBUX Sprinters with factory parking sensors.
Click here for demo video
Click here for installation / programming instructions
** This is a single vehicle use programmer. The programmer will not work on multiple vehicles- but the same vehicle can be programmed multiple times, if needed.
